Parameter Description /d Stops attempts to resolve the IP addresses of intermediate routers to their names. This can speed up the return of results. /h Specifies the maximum number of hops in the path to search for the target (destination). The default is 30 hops. /j Specifies that echo Request messages use the Loose Source Route option in the IP header with the set of intermediate destinations specified in . With loose source routing, successive intermediate destinations can be separated by one or multiple routers. The maximum number of addresses or names in the list is 9. The is a series of IP addresses (in dotted decimal notation) separated by spaces. Use this parameter only when tracing IPv4 addresses. /w Specifies the amount of time in milliseconds to wait for the ICMP time Exceeded or echo Reply message corresponding to a given echo Request message to be received. If not received within the time-out, an asterisk () is displayed. The default time-out is 4000 (4 seconds). /R Specifies that the IPv6 Routing extension header be used to send an echo Request message to the local host, using the destination as an intermediate destination and testing the reverse route. /S Specifies the source address to use in the echo Request messages. Use this parameter only when tracing IPv6 addresses. /4 Specifies that tracert.exe can use only IPv4 for this trace. /6 Specifies that tracert.exe can use only IPv6 for this trace. Specifies the destination, identified either by IP address or host name. /? Displays help at the command prompt. 到此这篇104协议遥控命令（103协议遥测数据说明）的文章就介绍到这了,更多相关内容请继续浏览下面的相关推荐文章，希望大家都能在编程的领域有一番成就！版权声明：
本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。
如若内容造成侵权、违法违规、事实不符，请将相关资料发送至xkadmin@xkablog.com进行投诉反馈，一经查实，立即处理！
转载请注明出处，原文链接：https://www.xkablog.com/sjkxydsj/51844.html